Your dream floor – ceramic installation instructions

Floor plan carefully designed ceramic-bright idea conceived, carefully designed look and feel and ceramic tiles perfect – it's still possible that anything if your retirement is not setup correctly. Learn how to work the right way to retire with these ceramic installation instructions and easy to see your floor tile dream look like magic.

1. to give an accurate estimate of the number somehow ceramic, thin, or cement grout and tools you need to buy (or rent), measure the length and width of the floor that you plan to retire. Start measurement by finding the center point of the space on the floor, you will be working on. You can do this by measuring across the room, the center mark. So in the other direction, and mark the Center, also. The intersection of two lines is the center of the floor ?????? above. Chalk lines run through the crop lines. These chalk lines will help you later when you rest your tile.

2. pick the right tools for consuming tiles. You can buy most of the tools and materials you'll need a hardware store, or neighborhood-Center of the House. For equipment that may have your budget like tile, hotchni, try to ask your local home center or yard rentals if they have the tools you ???????? for rental.

3. If you want to do a clean tile on the floor, make sure the floor tile installation that investment banks. If you are working on a concrete subfloor, check for cracks or waste. The first concrete subfloor and repair the cracks. If you see some cracks are too large to repair, replace them in the articles on the new concrete floors. Large cracks (or even less) expand over time, this will affect the tiles, also. If you are working with a plywood subfloor, ensure successful structurally sound and is capable of supporting the installation of ceramic. Your floor plywood should be at least 1 1/8 "thick and supported by strong underlayment beneath it. Heavy ceramic tiles to subfloor that can support the combined weight of their own. Otherwise, they will become dislodged or even beyond. If you are working on an existing ceramic floor, all you have to do is chisel-a large, flat and just hammer away and a mallet. Be sure to keep yourself protected – use a performance leather gloves, safety glasses, wore the Jersey.

4. to get a Visual of what looks like the floor tiles, laying out the ceramic tiles by chalk lines have made earlier. Start at and work on the way down the edges. Start at the Center, that crossed lines to meet and work. You can go creative in this part of the installation instructions of ceramic and really the look you want.

5. After you place the tiles on the floor in that you like, you can start now tiles. Place the tile Center, bond it to subfloor using thin mortar or glue set tile selection. It is recommended that you use a notched trowel to apply the mortar, but in fact use the subfloor a trowel may be more common that suggested by many of the installation instructions of porcelain tiles. To secure the ceramic, press down and twist it back and forth until the tile is not defined. If some of the mortar or glue oozes out, use your right off excess trowel.

6. make sure enable tile adhesives to settle overnight. At the same time, you can check your minutes or select mortar Tile ceramic installation instructions for glue for bonding time setting or hardening.

7. after tile settled, it's time to apply the grout. Grout is a construction material--to connect the tiles, fill out the empty spaces between the tiles for the seal. This is a wide variety of tints of color you can adjust the appearance you want, and tile color. Mix the grout according to the instructions for installations of ceramic package. Then, using a rubber Grout Float, work it into the joints. Using your grout float angle so that you can fill the gap with the amount of grout as possible.

8. After placing in the grout between the tiles, use gaps between humid sponge to wipe off the excess grout. Rinse the sponge frequently to get a large portion of the excess grout and tile off, all clean. You have the option to apply the grout sealing lines when they are dry.

After you perform these steps, you see how easy it is to make your dream come true for ceramic floor! Now, all you have to do is to save the new ceramic floor by maintaining hygiene and clean. Remember: the new ceramic floor is approximately 1/2 inches; Higher, so you may need to adjust the furniture, electrical and others.

It does not require to be genius installing ceramic tiles [http://web-reviews.info/tile-made-easy-review] and the old bath your dream bathroom! Learn how to install and configure in ceramic tiles [http://web-reviews.info/tile-made-easy-review] easy steps!

5 steps to complete a successful ceramic tile installation

If laying ceramic tiles is totally new to you, "5 steps to complete the installation successfully porcelain tiles" is a set of basic but important tips will help you avoid costly mistakes or installing bathroom porcelain tiles.

O plan which tile

O compare if you want to save

O prepare the surfaces of work over time

O lay the tiles

O recent refinements

Plan which tile

This step is often the importance of, and sometimes even forgotten (I believe?). Planning the installation of the porcelain tiles from A to z is probably one of the most important steps for a smooth tile installation, easy, and free showers.

Some things to consider are:

O the adjustment of the tile

O/colour a tile

O size

O the size of the area to withdraw. (This is the important data that will be essential to know how many tile, grout, and so on, to buy)

O glue, mortar or grout to suit your needs

Not all installations of ceramic tiles are the same, different installations might require a mortar or grout. Don't feel shy and ask the suppliers advice or help to calculate how much you need. They will gladly help you, as they may be for sale.

Then if you want to save!

It is not the same as the first step, however, when the budget is tight hard pressed to find the right tile ceramic installation ??????. Go do some compromises, so not to get carried away by the beauty of ceramic tiles. Prices can vary a lot between different squares, so some end rather expensive for only a few square meters.

Then, he has never been easier. Just sitting in front of your computer and the Internet. Use locally to find providers near you and pay them a visit.

Before the final decision always check the selected tile under the lights for the results can be surprisingly different.

Prepare the surface for a long time before laying a ceramic tiles
The surface to be tiled (floor, wall or another) will often need to be ready, this can include work as a fill, upstaged by big brother, leveling, priming and sometimes proof.

Proper preparation will affect directly the life expectancy of installing ceramic. But if you want to retire again, you want to get this right from the start.

This is probably the most important to ensure that the work of the pavement over time. Don't rush it.

Laying ceramic tiles with confidence

Technique of laying of ceramic tiles is not difficult. It takes a little practice before anyone can easily master it. Clean room tile before you begin will help you make your work easier and safer. Don't forget to wear your helmet doesn't have a safety cut or chipping tiles.

Laying ceramic tiles can also be a bit messy if you don't want dust throughout the House we are sealing the room you want to retire if possible. A large piece of plastic is a door frame will work well.

Try not to allow any glue to get the skin, don't forget to read the manufacturer instructions before opening even the Tin. If some of you ends, clean them with water as soon as possible. Although tile adhesives are usually rough, if you leave it for a while it may cause an allergic reaction.

Use a spirit level to help you with a level of depth & squares, to keep a distance between them as well.

Finishing

Once the glue has cured a tile or a mortar (dried) and tiled with them and even, you can start with the finish.

You'll need to fill the spaces between the tiles with grout making haven't all spaces as reason to damp these issues, the Department, for example.
The technique is very simple, use a rubber trowel faced spread the grout, a cotton to clean Tile Grout from surplus.
There are many different types of grouts; You will need to choose the correct answer, depending on the tile surface selected.

Now, you have laid ceramic tiles, you have to take care of them, manufacturers usually provide information about handling their tiles and is required only with minimum effort. Most household cleaning products do the job well, if you have a stain is stubborn, there are many commercial stain removers, make sure that you are using the correct product for the right to resign.

You are now closer to discovering how satisfying it can be treated up tile of yourself, just follow these 5 steps to get the best result.

Ceramic tile installation guide for beginners

So you've moved into your new apartment, you will find the floor it incorrectly. So you decide to tear out the old and new floor tiles. But be careful! Installing ceramic is not simple as it looks. So before you start tearing out something from the floor, take a few and to learn more about what you need to prepare for, apply to your new installation of ceramic tiles. Here are three great tips when planning what to prepare for installing your ceramic:

1) identify what kind of floor you have-or rather, your subfloor. It is important to know the type of subfloor that you set up the ceramic tiles above. There are three main types of floors (or subfloors), you may encounter when running the installation, porcelain tiles:

A. concrete floors-ceramic tiles over a concrete subfloor is ideal, but it should be checked before starting to clean debris. Any cracks or holes should fix, fill out before you can start the installation of ceramic. Once you begin working on the project, each tile ceramics bonded directly to your concrete floor. If the cracks widen, it will affect the tiles, also. How large is it perhaps cracks that it is better to replace the larger sections of your tone floor and fix up all the cracks. If you have lots of cracks, especially those that run the wall, consult an expert before you begin work on the project of tiles.

Born in plywood subfloor. If you move into a second floor, it is likely that you will have the plywood subfloor. Because you put ceramic tiles over wood subfloor plywoord your voice needs to be able to support the installation of successful structurally, porcelain tiles. Your floor plywood should be at least 1 1/8 inch thick and supported by strong underlayment beneath it. Heavy ceramic tiles to subfloor that can support the combined weight of their own. And they will become dislodged, or even beyond. Otherwise, it would be wise to install ceramic wood.

3. ceramic floors. Ceramic floors, was more than not, require a new occupant to redesign. There are two options for remodeling floor tiles exist: one, leave on the floor and the installation of the tiles in porcelain tile directly over it; Or two, remove the old stones. If the current tile floor is set above the bed mortar, the easiest way to remove them is to use a large flat chisel, hammer only. Be sure to keep yourself protected.

2) attempts to estimate the project by taking down the length and width of the floor tile. When you return to the window shopping, make sure to get the measurements and discuss it with the hardware or experts in the center of your home. These measurements will help you a lot of ceramic tile floors in estimating the assessed how much you need to buy. This will also help you estimate the amount of cement and Grout, and the ???????? you for the ceramic tile installation.

3) identify the look ?????? to achieve with your floor. Choosing ceramic tiles can be done easily by examining these general factors: the need for the appearance, size, and tile.

A. set based on the look you want. Turn on a tile. What is the way you play with ?????? ceramic tiles? Going on this rugged and rustic atmosphere? Or are you more at home with this modest natural adobe? Choose Tile ceramics that matches the overall appearance of the room. It's not working, if you have shiny tiled floors to go with orange Windows.

Born around and compare the tiles before buying. After you have made to the assessments of the floor space should be the tile, window-shop for your ceramic tiles. Ceramic floor tiles come in a variety of shapes, textures, and styles. Select a tile that is within your price range. Then, ask to see which color palette comes in tile, so that you can select one that matches the look that you want to perform. The most common ceramic tile size is one square feet. But ceramic tiles can come in a wide variety of sizes; Than one inch, on two legs.

3. what you seem to want to achieve, given that your tiles must be durable. A kind of ceramic tiles that you are looking for has three main features: the ability to meet the absorption of water, impressive resistance constant use, as well as the high aesthetic qualities. Most hardware stores are open to requests for information such as details of the power and the ability to use page, Gerd, physical pressure, fluid resistance. Learn will help you a lot along the tile installation and maintenance.

When hesitating between two options, hurt never seek help from a tile or someone who knows the tiles better than you. From squares and, to an existing tile ceramics without tearing out vulnerable subfloor, building expert can help you with information, at least, or help installing porcelain tiles. These professionals always open about sharing what they know about home improvement and making of beautiful floors. You can get references for experts, the center of the House and garden tiles, or rental of equipment of a tool.

Tips for installing tiles [http://web-reviews.info/tile-made-easy-review] may be all you need to give the floor to your new look. Get the installation of ceramic procedures [http://web-reviews.info/tile-made-easy-review] for free.

Design a tile design, printing and & your installation

If you plan to retire to bath alone, this article will help you plan your bathroom tile installation, cost effective, as well as giving you some ideas to design a tile. We will guide your new bathroom tile design and installation.

Attention-note that the installation of your retirement planning is the most important step in correctly for smooth easy, free bathroom tile installation problem.

Keep in mind that installing a DIY bathroom tiles is fast, so as not to miss the point and correct planning. All time spent planning your retirement Setup save you money and headaches.

You have to plan the project carefully bathroom tiles; Set design tile and tile, which materials you need, what tools you need.

Set the tile bathroom design templates

Templates that you can create with different squares limited only by your own tile design ideas. A wide variety of standard tile designs, ideas and tile available. Some manufacturers tile may make special custom tile designs for you.

Choose Format tile is of course the first thing to do, with out getting unanimous not planning to install tile bathroom.

You can find ideas design tile services a few basic templates & tile, remove it.

For inspiration you can check Google images for some design ideas bathroom tile, bathroom pictures of more than one million.

Matching tile-tiles are porous, non hnkbobi varieties. When planning the installation of tile bathroom, you must select the ceramic tiles-hnkbobi.

If your small bathroom and tile designs on them, you may need to go for smaller-sized tiles, as they have smaller designs. Too many stones designs do not fit a small bathroom so choose smaller tile design for smaller bathrooms.

If you go for a plain color, size is not so important, but try to follow the above rule anyway.

The idea of a good tile design is to select contrasting colors for the floors, wall tiles. Then have the same color as the square of land skirting the line.

The idea of another tile design is changing the color of your chest, you change the look of your bathroom.

Try to choose accessories that compliment the color of the walls.

Material-some of you? -To calculate the amount of material you need, you need to take precise measurements of the total want to resign.

Out of the total space and the size of each tile, you can calculate the number of tiles needed (you need to know the size of the tiles you've chosen).

Also, remember to take into account the differences between the tiles when calculating the number of tiles needed, so be sure to ?????? corresponding to the size of the tile you selected intervals.

If this equation becomes a bit complicated, you can always use the "calculate your needs a square" (link here) on this page.

When calculating the equivalent of more than half full and half as tile tile tile tile half less like. If you selected a multicolored services, calculate for each color separately, and note down the tile requirements.

Order-order tiles tiles of measurements taken. Note that the tiles are the provider are likely to sell boxes and the tiles individually.

Remember to invite additional tiles as you can be sure that the number of tiles will break during the installation (even the best professional tile transitions). In addition some of these may be added in the future if all squares should change. This is not only good but the practice is recommended.

Always invite more tiles in the tile to be ordered because the are not available in the future, if you require a replacement tiles, you will have difficulty finding a match.

The best tools for the good work-make sure you select the right tool for the job. Will make your work easier and safer too. It is likely that you have a basic Toolbox for tile installation you must but tools special tiles.

Some of them are expensive but not wasting your money buying professional tools that did not use enough to pay for themselves. Instead of renting them. How much $ $ you can have the best tools for a few days. And if you've done the planning properly only needed for a few hours.

Remember that your retirement planning setup correctly is the most important for a smooth tile for easy, free, problem.

I hope that was helpful, happy tiles!

How to install ceramic tiles-beginners guide to cheap and easy setup

Ceramic tiles offer a wide range and are ideal candidates for spruce up your rooms and make them bright and colorful. They are cost-effective compared to granite or marble with a variety of finishes and shapes. If installed properly, they can provide years of using rough without any kind of maintenance.

Tile selection

Be sure to select the correct size of the tile that completes the your room without looking needed out of proportion. If the tiles are too small, they tend to be the appearance of a checkerboard, a place to look is too busy. At the same time, extremely large tile will also even, especially if installed in the rooms. The smallest tile is 1 inch by 1 inch all the way to 12-12 inch tile. The most popular tile sizes range from 3 x 3 up to 4 x 4.

Tiles also come in different types, glazed tiles from, with a specific pattern or ' glazed baked from top, mosaics, which are ideal for any type of surface because they resist moisture to easily this chip to quarry tiles, which are made with a mixture of clays, commonly found in baby carrots.

Full tile

Were all the tiles on the floor without any type of glue. Make sure to put a plastic spacer between each tile to keep evenly over all the stones. Deploying some squares full as you can until you reach the walls of the room. Get corner and apply glue in the square 2 x 2. Deploy the tiles and carefully press it to tape. Use a soft stop her to ease gently into the glue tiles. Keep the gaps instead of to ensure that the tiles are spaced evenly. Continue applying glue in 2 x 2 and the rest of the tiles. Allow the tiles fill up overnight.

Border tiles

Carefully lay the tiles in a tile border so that it hits the sides full of walls. Make a full tile in a tile intersection. Use a tile cutter or tile saw to cut the tiles. Apply adhesive around the tiled tile border carefully and in full. Let them set overnight.

Adding grout

The next step, which is a fairly easy one, he put the grout. Grout is a construction material used for tile joints, voids, etc. You can buy color Cement Grout or form or in a form in a particular color. Remember to also receive a white or light-dirty over time. Grout is applied as a liquid and gradually hardens and the perfect joints between the tiles and fit. Make sure that the manufacturer instructions when applying grout. Also use the correct type of the tool as a floating tool sliding rubberized grout is used to distribute network grout. Apply grout generously all the tiles into a 45-degree angle. Remove excess Grout with a wet sponge or towel, making sure not to pull out the grout between the tiles. ?????? on the floor for a week will help also grout set completely, be cured completely.

Ceramic tile installation not very complicated but it requires a lot of time and patience. Besides, if not done right, the cost of replacing the tiles start to summarize. Learn more about proper procedures and guides that can help even the beginner the fun and easy to install ceramic tiles in your home.

Starting as a beginner, I used the right resources to aid expert tile installations. Install tile in various of my house and I now work on side projects for different members. Installing the tiles is not difficult. Visit my http://how-to-install-tiles.blogspot.com/ Web and learn how to install ceramic tiles without them contractors.

Glass mosaic tile installation shower steamer ducks

Translate Request has too much data
Parameter name: request
Translate Request has too much data
Parameter name: request

I've always enjoyed installing residential tile. There's something about thinking creatively and making an artistic statement that appeals to me with the challenge. To express a customer's design vision calls for good communication skills and at least some intuition. Making a customer happy and feeling comfortable in their home environment makes me happy, too. Nothing can compare to the satisfaction of knowing a job has been well done, in seeing a beautiful and properly installed tile job. And, indeed, a glass mosaic tile installation can look fantastic. This glass mosaic installation sure was a challenge in it's complexity.

A short while ago Debbie and Rich asked me to finish a bathroom that would include tiling a steamer/shower surround with glass mosaic tile, for shower pan, walls, and ceiling. They chose a transparent glass mosaic called Tesserra red #777, non-iridescent, by Oceanside Glasstile of Long Beach, Calif. I believe they wanted to see as well as feel the red hot heat of a steam bath. The glass mosaic tiles were of the same red hue, but randomly varied in saturation: some glass tiles were darker or lighter than others.

Each one inch square handmade mosaic glass tile was a quarter inch thick with a finished face surface that was seemingly chipped, crazed, or irregular, not smooth. The tiles came in sheets twelve inches square, face glued to brown backing paper with a water soluble adhesive similar to that used for wallpaper. The tiles reminded me of chipped ice cubes, with sides tapered away from the face and a flat back slightly textured from molds. Most tiles were fairly square, some were slightly trapezoidal in shape, as the molten glass poured into the molds overflowed a sixteenth inch to form a sheet that was broken apart after cooling.

The bathroom had been framed in and sheetrocked walls and ceiling before my involvement, with green board placed in the steamer/shower surround area. I wanted to jump right in, assuming I could apply a builder's felt paper moisture barrier over the greenboard, then install cementitious backerboard and parge it with a waterproofing membrane to contain steam. But, being a relative beginner to any mosaic tile installations, it was a good thing that I had some uncertainty, so I decided to talk first to Oceanside's technical support experts.

Technical support insisted that I remove the greenboard from the steamer/shower surround. Originally developed as a substrate for directly applying tile, greenboard has now become unacceptable for any bathroom use according to building code. Also, there was a chance, however slight, that steam moisture could permeate the waterproofing membrane and eventually dampen any sheetrock or greenboard, causing deterioration and mold buildup where it could never dry out. More recently developed cementitious backerboard, code approved, performs far better for tile, especially in a wet environment.

Then, a key point to this entire installation, technical support strongly advised me not to apply a waterproofing membrane directly behind any transparent tile. Water would certainly settle behind the tile, especially where steam would force it, causing a splotchy look where some tile would areas appear darker than other areas. Untreated backerboard would allow water to diffuse away.

Finally, expansion joints are essential for glass tile installations, as well as most other tiles, especially in a steamer environment where temperature swings are most pronounced. Otherwise, glass tiles, being brittle, could crack or pop off under shear pressure. I was advised to install expansion joints at the inside corners of walls and ceiling, as this steamer/shower surround measured 4'6" wide, 7'6" high, and 3'6" deep. Of course, the steamer/shower surround area 2x4 walls and ceiling were insulated with R-13 fiberglass batts.

With any steamer/shower, it is advisable to slope the tiled ceiling for water runoff to reduce the chance of steam condensation causing dripping. I reframed the flat ceiling to provide a slope of one inch per foot, this being a judgment call on my part, while the Tile Council of North America recommends a slope of two inches per foot (SR614-05).

After removing greenboard in the steamer/shower surround area walls and ceiling, I installed builder's felt paper over wall studs and ceiling joists, and lapped it over the shower pan vinyl membrane as a final barrier to water penetration. I then installed 1/2" cdx plywood, which does have some exterior water exposure rating, unlike greenboard. The plywood had the added benefit of stiffening surround walls and ceiling, creating a stable base for the glass mosaic tile. I stopped the plywood at the built-in seat level 16" above the shower pan, because I was concerned about water otherwise wicking up through the plywood from the shower pan mortarbed. Below seat level I installed 1/4" backerboard over the shower pan vinyl membrane and then applied hydraulic cement parging to straighten backerboard bulges caused by vinyl membrane folds and to bring the backerboard into plane with the 1/2" plywood.

I taped and mudded all plywood and backerboard joints with white alkaline resistant fiberglass mesh tape and thinset. Thinset is not impervious to water, of course. Then I applied two thin coats of Mapei's trowel-on waterproofing membrane system consisting of Mapelastic #315 powder mixed with undiluted Mapelastic #315 liquid. The powder is reinforced with fiberglass fibers and the liquid is an acrylic latex admixture. Be sure to wear old clothing when using this product, because at the consistency of thin pancake batter, the mix may get all over you, especially when working overhead. When set, the waterproofing membrane remains surprisingly flexible and adheres very strongly to anything. All inside plywood corners were taped, mudded, and waterproofed.

Over the waterproofed plywood and backerboard, I installed 1/2" backerboard, and I again taped and mudded all joints, being careful to stay away from inside corners. In the backerboard corner expansion joints, I installed 1/4" closed cell polyurethane backer rod, which is water resistant. I caulked over the backer rod with grey Latisil NS polyurethane flexible joint filler/sealant.

After this preparation, I was ready to tile. I was very concerned about the one inch square mosaic layout, trying to eliminate glass cuts and to balance the field width and height. I procured a pair of glass mosaic tile carbide nippers (available from stained glass supply shops or through the tile supplier), which cut the glass with a chiseling action. The tiles may also be cut by a wet tile saw with a continuous, smooth-rim diamond blade, but I preferred to use a hand-held 4" dry grinder with diamond wheel to trim and square nipper cuts. The glass acted in a fashion similar to chiseling ice - I could never be certain of an initial square cut, but with some practice, the nippers worked quite well. As it turned out, the layout was fairly easy to adjust with the approximate 1/8" to 1/16" spacing of the somewhat irregular tiles. I tried most of all to use more than a half tile. Where cut for layout, it was best to cut the tiles a bit more than it seemed necessary.

I started tiling with the shower pan where I could lap over layout cuts at the perimeter with full wall tiles. Installing a square drain cover helped to make tile cuts easier and complemented the square tile theme. I used Mapei Kerabond #102 white dry-set mortar with undiluted Keralastic #310 liquid acrylic latex admixture to enhance bond and flexural strength. I greatly appreciated it's long open time for this challenging installation. Using the flat side of a trowel, I applied the thinset and then raked it with a 3/16"x1/4" V-notched trowel to establish the proper depth of the setting bed. I then used the flat side of the trowel again to flatten notch lines and reduce the possibility of air pockets or voids, resulting in a consistent setting bed 1/8" thick.

The shower pan, seat, walls, and ceiling tile mosaic sheets were then applied to the setting bed with brown face paper outward, using light even pressure to establish setting bed contact and eliminate voids. Then, to achieve a uniform finish surface, a 3/4" plywood beating block was lightly tapped with a hammer. I worked quickly applying subsequent sheets with grout joints aligned to avoid skinning of the setting bed and to unify the overall tile surface with the beating block. After 15-20 minutes of setting time, I lightly misted the brown backing paper with a household spray bottle several times, patting with a sponge, using a mixture of water and a small amount of DIF wallpaper remover. After the water absorbed into the paper, the glue released from the paper, allowing the paper to be carefully and slowly peeled away to the side without lifting tiles out. Timing of paper removal was critical not to pull tiles out while at the same time allowing for tiles spacing adjustments in the setting bed's semi-fresh/flexible state. Particular attention was paid before final set to make grout joints adjustments appear random between individual tiles and adjacent paper sheets to eliminate the sheet pattern. Some individual tiles might sag over time - I would eventually remove them, scrape out the thinset behind, then reattach with some new thinset. I even used some plastic tile spacer wedges where necessary.

Some thinset would ooze into and fill adjoining grout joints, but the setting bed was allowed to cure overnight. Then, taking a putty knife, excess thinset could be scraped out from grout joints when still relatively soft, while not disturbing the tiles. After more curing time, I could then remove residual paper and glue by wiping clean with a damp sponge. I waited for several more days before grouting to be sure the thinset had cured.

But before grouting, I filled corner expansion joints with a color matching sanded caulk to be sure grout did not fill the joints. I was amazed at the holding power of the thinset, as during the application of grout, I really had to force it into tile joints. I used a Mapei Keracolor S sanded pearl grey grout. Of course, glass tile is impervious to moisture, so the grout will take a bit longer to set than otherwise.

After cleaning and sealing the grout, I was able to stand back and feel satisfied knowing I rose to the challenge and accomplished something out of the ordinary. Hopefully Debbie and Rich are happy and able to enjoy many relaxing steam baths.

Please see my website, http://davidtaylorremodeling.com/, for photos of this tile installation.

How to Video Guide: Basic Ceramic Tile Planning & Installation [VHS]

In this video, Barry Hall presents a thorough overview of clay pot ("udu") drums and how to play them. A variety of playing strokes, from basic to advanced, are explained and demonstrated in detail. An accomplished clay pot drum builder as well as player, Barry also briefly explains the process of building ceramic drums and demonstrates a number of common and unusual udu-family instruments from his collection.

Extending the basic strokes, percussionist Matthew Schertz shows how to apply Afro-Cuban, South Indian and Middle Eastern drumming techniques and rhythms to the udu. To round out the presentation, members of the Burnt Earth Ensemble perform several musical selections that show how udus can be musically combined with each other and with other instruments.

This 95 minute video is packed with useful and inspiring information and performances. A valuable resource for those new to clay pot drums, it also presents a number of unusual techniques and tricks for more seasoned players.

Price: $14.95

Click here to buy from Amazon